- Chemicals
- Cleanroom Consumables
- Covid Essentials
- Drying Units
- Emergency Response Kits
- Fume Hoods
- Food Industry Consumables
- Kimberly-Clark Professional
- Laboratory Equipment & Tools
- Laboratory Furniture
- Personal Protective Equipments
- Steam Jet Cleaner
- Ultrasonic Cleaners
Challenger Avenue (M)
Sdn Bhd
No. 8, Lot 778, Jalan Subang 4,
Subang Light Industrial Park,
47610 Subang Jaya,
Selangor, Malaysia.
+603-5632 2128
+603-5632 9155
+603-5632 9155
Elma Lab Clean S20
| Previous | 1 / 5 | Next |
DESCRIPTION:
elma lab clean S20 (ELC S20) is a liquid, acidic, foam-inhibited cleaning concentrate for ultrasonic, immersion and splash cleaning of acid-resistant parts and medical devices such as medical and laboratory instruments, implants etc. made of stainless steel, glass, ceramic and plastic.
elma lab clean S20 (ELC S20) removes mineral contamination like lime scales, lime soaps and other Ca- and Mgbound contamination, metal oxides (rust) and flux residues after soldering, mineral oils and greases (remove animal and vegetable oil and fat using alkaline cleaner before), fingerprints and dust. Brightens tarnished metallic surfaces (but not temper colours).
APPLICATION AND DOSAGE
elma lab clean S20 (ELC S20) is a liquid, acidic, foam-inhibited cleaning concentrate for ultrasonic, immersion and splash cleaning of acid-resistant parts and medical devices such as medical and laboratory instruments, implants etc. made of stainless steel, glass, ceramic and plastic.
elma lab clean S20 (ELC S20) removes mineral contamination like lime scales, lime soaps and other Ca- and Mgbound contamination, metal oxides (rust) and flux residues after soldering, mineral oils and greases (remove animal and vegetable oil and fat using alkaline cleaner before), fingerprints and dust. Brightens tarnished metallic surfaces (but not temper colours).
APPLICATION AND DOSAGE
- Ultrasonic bath: Dosage: ~1-2 % by volume in tap or deionised water, i.e. for 1 liter of 1 vol.-% solution mix 10 ml elma lab clean S20 (ELC S20) with 990 ml water (Temperature: 50-75 °C.)
- Splash cleaning: Dosage: ~0,5 % by volume in tap or deionised water. Temperature > 55 °C.
- Immersion bath: Dosage: > 2 % by volume in tap or deionised water.
- Milkiness of heated cleaning solution does not reduce the cleaning performance.
- Rinse cleaned surfaces thoroughly with water and dry.
- Rinse rust-sensitive surfaces with corrosion protection additive elma-KS, ~0,1 vol.-%, blow off or dry immediately.